Home    Index    Webmail

Corporate Information

Products Range

Production Facilities

Cleanroom Process

Certification

Quality Assurance

Investor Relations

Contact Us

Enquiry

Click here to
TOP GLOVE website

BS EN ISO 9001 : 2000 REG. No. AJA 02/4327
PRODUCTION FACILITIES

STEP 1

To produce high quality products requires stringent quality control systems on the incoming raw materials. Various testing and research have been implemented to ensure our manufacturing processes are only using the right specification and high quality raw materials to produce the tip-top quality finished products.

STEP 2

The dipping process is including optimum control on the temperatures, duration of dipping, viscosity flow of compounded latex, effective leaching process which eventually produced intact latex films that are impermeable to viruses and with high elasticity and durability properties.

STEP 3

The parameters control systems for the raw materials used and operational process are set up to conform to the relevant or specific sections of the USA FDA's Good Manufacturing Practices (GMP), ISO 9001:2000, ASTM & EN455 Standards. With different formulations, a range of natural latex and Nitrile gloves are produced to pass the Biocompatibility tests which included the Delayed Contact Sensitization and Primary Skin Irritation Studies, Dermal Observation and the Cytoxicity Test. We will make sure Flexitech gloves are safe for the users. The 100% consumer's safety is always our main concerns.

STEP 4

The Performance Properties are guaranteed by eliminating pinholes gloves with a fully automatic Watertight Testing machine which is calibrated to fill gloves with 1,000ml of water at least 2 minutes in according to the Sampling Plan Special Inspection Level S-4, AQL 1.5.

STEP 5

Both the prepowered and powdefree latex examination gloves are produced within the USA ASTM permissible low-protein level while the protein-free Nitrile gloves are low modulus with high puncture and abrasion resistance which are extensively used in Healthcare, Clean room and Household industries.

STEP 6

After the final random QA inspection, different types of finished good are pack flat-stack into dispenser boxes and cartons in different hygienically controlled environments.
MANUFACTURING PROCESS CHART

Click here to enlarge
Top